18″ FloaterCoater with Equal Lubrication to Rolls and Valves in Cabinet
The FloaterCoater is the roller coater of the future for the metal stamping industry today. It is constructed of stainless steel and with rolls that float with the movement of the coil stock. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The FloaterCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does on need lubrication, thus saving on lubricant cost. Rolls are held in such a manner that they can be removed and installed in minutes. All of the features of the FloaterCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system.
$6,290.00
Manual On/Off Valves are attached on each side of the cabinet, one set for the top roll and one set for the bottom roll. Each On/Off Valve regulates supply of lubricant to a Dispensing Head. The Dispensing Head disperses the lubricant onto a specific area of the roll.
Attached manifolds simplify installation – Simply mount, attach the lubricant supply and return lines and your done!
The FloaterCoater line is comprised of eight standard units to cover the common applications found in stamping. The units are divided into three families. Each family has the same size housing with the exception of the length, and they use the same diameter rolls.
| Dimensions | 26.25 × 6.5 × 8.935 in |
|---|---|
| Size | 18 in. |
| Remote Valves | No |
| Lubrication Distribution | Equal |
| Size | |
| Distribution of Lubricant | Equal Distribution |
| Location of Valves | On/Off Valves in the Cabinet |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.